1586484320b24ce887290468dafb8b28 English 8-bit variable size UCS Transfer Format, based on ISO/IEC 10646 7fe9f59731ab47b6a20e792e0cba4641 dataset NERC EDS Centre for Environmental Data Analysis 01235446432 RAL Space STFC Rutherford Appleton Laboratory, Harwell Campus Didcot OX11 0QX United Kingdom support@ceda.ac.uk pointOfContact 2026-05-06T02:28:28 UK GEMINI 2.3 WGS 84 TLS-ARCH terrestrial laser scanner data; branch scan projects from Australia, Brazil and Malaysia, June 2018 - July 2019 2025-05-23T11:11:59 publication 2025-05-23T11:11:59 creation https://catalogue.ceda.ac.uk/uuid/1586484320b24ce887290468dafb8b28 1586484320b24ce887290468dafb8b28 NERC EDS Centre for Environmental Data Analysis This dataset is comprised of raw data from the NERC-funded, full waveform terrestrial laser scanner (TLS) deployed at sites on three continents, multiple countries and plot locations. Approximately 600 branches were harvested, had their leaves removed and were scanned in a controlled environment. More information can be found in Wilkes et al. 2021. Terrestrial laser scanning to reconstruct branch architecture from harvested branches in the documentation section. A RIEGL VZ-400 terrestrial laser scanner (RIEGL Laser Measurement Systems GmbH) was used for all scans. In all, 1–6 branches (dependent on branch size) were arranged in a group, orientated so that they would not touch each other or the ground, and scanned simultaneously. Branches were secured in the end of metal tubing and placed in buckets of sand to minimise movement. Fiducial markers (akin to QR codes) were placed on the floor to allow identification of each branch in post-processing. The markers include a pattern of four retroreflective stickers (10 mm ∅) which were used to co-register scans. Between four and six scan positions (collectively known as a project), located around the branches, were used to capture each set of branches. At each position, a single scan was performed where the scanner rotation axis was approximately perpendicular to the ground plane. A 100 degrees × 80 degrees field of view was captured at an angular resolution of 0.02 degrees ; each scan took 2:45 min where ∼20M laser pulses were fired. The VZ-400 beam has an exit diameter of 0.007 m and a beam divergence of 0.35 mrad; branches were at a maximum distance of 5 m from the scanner, and at this distance maximum cross-sectional beam diameter is ∼0.01 m. The scanning area needed to be large enough to allow easy movement around the branches and minimum distance between the scanner and target (for the RIEGL VZ-400, this is 0.5 m). It should be noted, owing to the restricted scanning field of view, large or featureless areas required additional ‘features’ (e.g. furniture in the scanning field of view) to assist with registration. Initially, scanning was performed outside but it became clear that branch tips would oscillate even with very low wind speeds; therefore, scanning was moved to an indoor space. Co-registration of scans in a project is a two-step process (coarse- and fine-registration) that produces a 4 × 4 roto-transformation matrix for each scan position. When applied, a scan is rotated into a common, arbitrary coordinate system (nominally referenced to the first scan position). Co-registration of a project was done using RiSCAN Pro (version 2.5.1; RIEGL Laser Measurement Systems GmbH). Coarse registration was achieved using the retro-reflective stickers on the corners of the fiducial markers. Fine registration was computed using RiSCAN Pro’s Multi-Station Adjustment (MSA) method (RIEGL Laser Measurement Systems GmbH, 2019). MSA fits a set of planes to a point cloud by iteratively voxelising the point cloud, with each iteration voxel edge length decreases until plane fit error is below a specified threshold (or no plane is fit if voxel edge of minimum number of point thresholds are exceeded). Here voxel edge length decreased from 1.024 to 0.064 m, minimum points were 10 and maximum plane error was 0.006 m; this resulted in 7,000– 20,000 planes per scan position. MSA then uses a least square solution to iteratively adjust scan position to minimise positional error between overlapping planes. Wilkes, Phil Unavailable author Unavailable author NERC EDS Centre for Environmental Data Analysis custodian 01235446432 RAL Space STFC Rutherford Appleton Laboratory, Harwell Campus Didcot OX11 0QX United Kingdom support@ceda.ac.uk custodian NERC EDS Centre for Environmental Data Analysis distributor 01235446432 RAL Space STFC Rutherford Appleton Laboratory, Harwell Campus Didcot OX11 0QX United Kingdom support@ceda.ac.uk distributor Disney, Mathias Unavailable principal_investigator Unavailable principalInvestigator Malhi, Yadvinder Unavailable principal_investigator Unavailable principalInvestigator NERC EDS Centre for Environmental Data Analysis point_of_contact 01235446432 RAL Space STFC Rutherford Appleton Laboratory, Harwell Campus Didcot OX11 0QX United Kingdom support@ceda.ac.uk pointofContact NERC EDS Centre for Environmental Data Analysis publisher 01235446432 RAL Space STFC Rutherford Appleton Laboratory, Harwell Campus Didcot OX11 0QX United Kingdom support@ceda.ac.uk publisher unknown dataset terrestrial laser scanner TLS-ARCH Branches Australia Gabon Malaysia Biomass orthoimagery theme GEMET - INSPIRE themes, version 1.0 2008-06-01 publication otherRestrictions Public data: access to these data is available to both registered and non-registered users. otherRestrictions Under the following licence http://creativecommons.org/licenses/by/4.0/, appropriate use of these data may fall under any use. This message is intended as guidance, always read the full licence. When using these data you must cite them correctly using the citation given on the CEDA Data Catalogue record. grid English imageryBaseMapsEarthCover -52.3525 145.016 -17.2861 4.747 2018-06-26T00:00:00 2018-07-30T00:00:00 Point cloud data in RIEGL proprietry .rxp format, image data in .jpg format and matrix data in text file. NERC EDS Centre for Environmental Data Analysis Data Center Contact 01235446432 RAL Space STFC Rutherford Appleton Laboratory, Harwell Campus Didcot OX11 0QX United Kingdom support@ceda.ac.uk distributor https://catalogue.ceda.ac.uk/uuid/1586484320b24ce887290468dafb8b28 CEDA Data Catalogue Page Detail and access information for the resource information http://data.ceda.ac.uk/neodc/tls/data/raw/branches-tls DOWNLOAD Download Data download https://doi.org/10.1111/2041-210X.13709 Terrestrial laser scanning to reconstruct branch architecture from harvested branches; Wilkes et al. 2021 No further details. information dataset Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services 2010-12-08 Data were produced by the project team and supplied for archiving at the Centre for Environmental Data Analysis (CEDA).