1d479f96-5f46-05a5-e054-002128a47908 English nonGeographicDataset non geographic dataset British Geological Survey +44 131 667 1000 The Lyell Centre, Research Avenue South EDINBURGH LOTHIAN EH14 4AP United Kingdom enquiries@bgs.ac.uk pointOfContact 2026-04-12 UK GEMINI 2.3 http://data.bgs.ac.uk/id/dataHolding/13606787 EPSRC Project: DiSECCS - Diagnostic Seismic toolbox for the Efficient Control of CO2 Storage 2013-09 creation http://data.bgs.ac.uk/id/dataHolding/13606787 The year 2011 recorded the highest ever global consumption of energy, estimated at more than 12 billion tonnes of oil equivalent. Because of this, and despite increasingly widespread deployment of renewable energy generation, annual global emissions of greenhouse gases are continuing to rise, underpinned by increasing consumption of fossil fuels. Carbon capture and storage (CCS) is currently the only available technology that can significantly reduce CO2 emissions to the atmosphere from fossil fuel power stations and other industrial facilities such as oil refineries, steel works, cement factories and chemical plants. However, achieving meaningful emissions reduction requires wide deployment of large scale CCS and will involve long term storage of very large volumes of CO2 in the subsurface. Ultimately, if CCS were to be rolled out globally, volumes of injected carbon dioxide could become comparable, on an annual basis, to world hydrocarbon production. The most likely sites for CO2 storage are depleted oil and gas fields or saline aquifers. Understanding and monitoring geomechanical processes within different types of storage site is crucial for site selection, for achieving long term security of storage and for instilling wider confidence in the safety and effectiveness of CCS. In many cases depleted hydrocarbon fields have experienced strong pressure decrease during production which may have affected the integrity of the caprock seal; furthermore, CO2 injection into saline aquifers will displace large volumes of groundwater (brine). In all cases, as injection proceeds and reservoir pressures increase, maintaining the geomechanical stability of the storage reservoir will be of great importance. Understanding and managing these subsurface processes is key to minimising any risk that CO2 storage could result in unexpected effects such as induced earthquakes or damage to caprock seal integrity. Experience from existing large-scale CO2 injection sites shows that monitoring tools such as time-lapse 3D seismic, micro-seismic monitoring and satellite interferometry have the potential to make a significant contribution to our understanding of reservoir processes, including fine-scale flow of CO2, fluid pressure changes, induced seismic activity and ground displacements. The DiSECCS project will bring together monitoring datasets from the world's three industrial scale CO2 storage sites at Sleipner (offshore Norway), Snohvit (offshore Norway) and In Salah (Algeria) to develop and test advanced and innovative monitoring tools and methods for the measurement and characterisation of pressure increase, CO2 migration and fluid saturation changes and geomechanical response. A key element of the research will be to identify those storage reservoir types that will be suitable for large-scale CO2 storage without unwanted geomechanical effects, and to develop monitoring tools and strategies to ensure safe and effective storage site performance. In addition, our research will explore public attitudes to CO2 storage. Grant number: EP/K035878/1. Enquiries British Geological Survey 0115 936 3143 0115 936 3276 Environmental Science Centre, Nicker Hill, Keyworth NOTTINGHAM NOTTINGHAMSHIRE NG12 5GG United Kingdom enquiries@bgs.ac.uk distributor Enquiries British Geological Survey 0115 936 3143 0115 936 3276 Environmental Science Centre, Nicker Hill, Keyworth NOTTINGHAM NOTTINGHAMSHIRE NG12 5GG United Kingdom enquiries@bgs.ac.uk pointOfContact Enquiries British Geological Survey 0115 936 3143 0115 936 3276 Environmental Science Centre, Nicker Hill, Keyworth NOTTINGHAM NOTTINGHAMSHIRE NG12 5GG United Kingdom enquiries@bgs.ac.uk principalInvestigator notApplicable https://resources.bgs.ac.uk/images/geonetworkThumbs/1d479f96-5f46-05a5-e054-002128a47908.png Geology GEMET - INSPIRE themes, version 1.0 2008-06-01 publication Carbon capture and storage BGS Thesaurus of Geosciences 2022 revision NGDC Deposited Data UKCCS dataCentre NERC_DDC otherRestrictions intellectualPropertyRights Either : (i) the dataset has not been formally approved by BGS for access and use by external clients under license; and / or (ii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted before the dataset can be provided to, or accessed by, BGS staff or external clients. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant access restrictions. This staff member should revert to the IPR Section (IPR@bgs.ac.uk) for advice, should the position not be clear. otherRestrictions The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused. Either: (i) the dataset is made freely available, e.g. via the Internet, for a restricted category of use (e.g. educational use only); or (ii) the dataset has not been formally approved by BGS for access and use by external clients under licence, but its use may be permitted under alternative formal arrangements; or (iii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted in order to determine the permitted usage of the dataset. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant use restrictions. This staff member should revert to the IPR Section (ipr@bgs.ac.uk) for advice, should the position not be clear. English geoscientificInformation 2013-09 2016-09 EPSRC Grant number: EP/K035878/1 Enquiries British Geological Survey 0115 936 3143 0115 936 3276 Environmental Science Centre, Nicker Hill, Keyworth NOTTINGHAM NOTTINGHAMSHIRE NG12 5GG United Kingdom enquiries@bgs.ac.uk distributor https://www.bgs.ac.uk/ WWW:LINK-1.0-http--link BGS Homepage The BGS Homepage is an entry point to the BGS data services. information nonGeographicDataset non geographic dataset INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology 2011 publication See the referenced specification false Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services 2010-12-08 publication See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF false EPSRC project, grant number: EP/K035878/1, Lead institution: British Geological Survey